MegaPlot Poland - Mineral Wool Cutting Machine, Stone Wool CNC Cutting, CNC Machinery Manufacturer - MegaPlot Poland - EPS Hot Wire Foam Cutters, Fast Wire Cutters and CNC Routers since 1993

WOOL MASTER
THE PROUD WINNER OF THE 2022 BUDMA GOLD MEDAL AWARD

NEW 2022 CNC ABRASIVE WIRE CUTTING MACHINE FOR
GLASS WOOL, STONE WOOL, SOFT & RIGID PU & PIR FOAMS, POLYSTYRENE (EPS) & ROCKWOOL

IDEAL FOR CUTTING FLAT ROOF PANELS OUT OF:
- MINERAL WOOLS (STONE WOOL, GLASS WOOl, ROCKWOOL)
- PIR & ISO FOAMS
- POLYSTYRENE (EPS & XPS STYROFOAMS)
FULLY AUTOMATIC CONTOUR CUTTING MACHINE ALSO IDEAL FOR PIPE INSULATIONS, CHIMNEY INSULATIONS AND MORE
TABLE SIZE: 1800X1800 MM
WORKING HEIGHT OF 300 MM
WIRE TILT UP TO 10%
EXCELLENT VALUE FOR MONEY, HIGH-END SPECS

WOOL MASTER - the ultimate flat roofing systems cutting machine for mineral wools (stone and glass wools), PIR & EPS polystyrene

If you are looking for a larger CNC abrasive wire cutting machine capable of handling full PU or PIR blocks, please check our XTR PRO series (as shown onm the right).

COMMON APPLICATIONS:

flat and sloped roofing systems out of mineral wool, PIR or EPS
wool and PIR insulation (chimneys, pipes, walls, etc.),
SIP panels (PUR/PIR & EPS)
sheet cutting
contour cutting in any flexible or rigid foams

The Wool Master abrasive fastwire machine is based on our widely popular XTR PRO series of fast wire cutters but has been redesigned with the roof panel cutting requirements in mind: different working area, wire tile, cutting at a 45 degree angle, etc.

Just as with the standard XTR PRO series, the Wool Masters are computer-controlled machines which come with our own advanced electronic controllers based on CORTEX architecture and are connected to a PC via a USB port and then controlled with our proprietary FastWire application.

For the flat and sloped roof systems cutting one can either use the supplied and in-built roof panel generator or the drawings can be prepared in any graphics software capable of exporting to one of the formats supported by our software, e.g. CorelDraw, AutoCad or Adobe Illustrator. Once the drawing is opened in our software all you have to do it set cutting parameters (such as speed, wire speed, etc.) and click Cut.

During the cut the endless steel fast wire is sped up to 380 km/h to perform the cut. A wide selection of cutting wires is available to ensure consistent high-quality cuts in a variety of different materials.

CUSTOM SIZES AND CONFIGURATIONS AVAILABLE, PLEASE CONTACT US WITH YOUR REQUIREMENTS AND WE WILL BE HAPPY TO QUOTE

TECHNICAL SPECIFICATION


WORKING AREA	TABLE: 1800x1800 mm to handle a standard wool sheet in either direction but also to handle an up to 1200x1200 mm flat roof panel at a 45 degree angle for UP-DOWN (Z axis): 300 mm WIRE TILT: up to 10% If you are looking for a larger CNC abrasive wire cutting machine capable of handling full PU or PIR blocks, please check our XTR PRO series
CUTTING WIRE	endless, abrasive, dia: 1.1-1.6 mm (depending on material) pneumatic wire tensioning wire break detection
WIRE SPEED	up to 380 km/h
WHEEL DIAMETER	HDPA wheels of 405 mm diameter
WIRE MOTOR	3 kW, 400 V, 50 Hz, inverter-controlled
X & Y DRIVES	3-phase easy servo motors + worm gears
MAX. TRANSIT SPEED	10 meters/min
ACCESSIBILITY	full access from all sides + optional complete enclosure with sliding doors
PC REQUIREMENTS	Windows XP, Vista, 7, 8, 10 & 11
WARRANTY	1 year
POWER REQUIREMENTS	AC 400V (3-phase), up to 6 KW
INCLUDED IN THE PRICE	WoolMaster FastWire Cutting Machine FastWire application with unlimited free updates RoofMaster app for flat roof panel generation advanced electronic controller based on ARM architecture with USB support 5 cutting wires wired handheld with a display 12-month warranty assembly and operational manuals year-round tech support unlimited free training in our factory in Poland
NOT INCLUDED IN THE PRICE	Windows PC necessary to control the machine graphics software, e.g. CorelDraw delivery, installation and training on site (if required)

OPTIONAL ACCESSORIES

DUST SUCTION HEAD & VACUUM DUST COLLECTOR

custom designed dust collecting head
collects most dust produced during the cutting process
four-bag design for improved performance and less frequent maintenance
powerful 7 HP 3-phase motor
comes complete with 10 meters of flexible 100 mm piping

HANDHELD/REMOTE CONTROLLER WITH A DISPLAY

convenient overview of current machine parameters such as wire location, rpm, cutting speed, etc.
on-the-fly adjustment of parameters during a cut: increase/decrease cutting speed, increase/decrease rpm, etc.
start/stop/continue a cut
full manual control of machine movement in all axes

FULL ENCLOSURE

sliding door on front and/or back
operator's side door
full ceiling
keeps all dust within the machine
increased safety for the operator

SOFTWARE

All XTR fast wire cutters come with our own, user-friendly yet powerful FastCutter software. It is available in many different languages and is constantly being improved and developed; all customers receive free upgrades when new versions become available so they are always able to use the machine to its full potential.

FASTCUTTER

included with all XTR units
unlimited free upgrades
available in multiple languages
supports the following file formats:
- plt - e.g. CorelDraw
- dxf - e.g. AutoCad
- EPS/AI - e.g. AdobeIllustratoravailable in many different languages
compatible with Windows XP, Vista, 7, 8 and 10
user-friendly interface, easy-to-use yet powerful
on-screen cutting simulation
unlimited settings' libraries
built-in duplication feature
full manual control for simple cuts not requiring a drawing

WINNER OF THE 2022 BUDMA GOLD MEDAL AWARD!

As shown @ Foam Expo Europe 2021

If you are looking for a larger CNC abrasive wire cutting machine capable of handling full PU or PIR blocks, please check our XTR PRO series as seen in the below video.