T SERIES OF EPS CUTTING MACHINES

AFFORDABLE AND VERSATILE
  • OVER 2500 UNITS INSTALLED WORLDWIDE
  • 1 OR 2 CUTTING WIRES OF UP TO 300 CM LENGTH
  • MULTIPLE SIZES AND CONFIGURATIONS AVAILABLE
  • OPTIONAL UNIQUE INDEPENDENT AXIS CONTROL FEATURE
  • MULTIPLES 3D OPTIONS (TURNTABLES, LATHES, ETC.)
  • MAX. TRANSIT SPEED OF UP TO 5  METERS/MIN.
  • VARIOUS WIRE TENSIONING OPTIONS: SPRING, ELECTRIC, PNEUMATIC
  • ​EUROPEAN QUALITY WITH CE CERTIFICATION 
  • BACKED BY MEGAPLOT'S 20+ YEARS OF DESIGN EXPERIENCE

3D CUT ON TURNTABLE

INDEPENDENT AXIS CUT

SHAPEWIRE CUT

STANDARD MODELS/CONFIGURATIONS

"Z" = MACHINE WIDTH = CUTTING WIRE LENGTH
This dimension determines e.g. the max. length of your 2D moulding.
   
"X" = MACHINE LENGTH
 This dimension determines. e.g. the max. length of your column cut on the lathe.
 
"Y" - MACHINE HEIGHT
This dimension (always around 1220-1300 mm on standard MegaPlot machines) determines the max. height of the EPS block that will fit on the machine.
 
"X" OF 130 CM
​"SMALL"
"X" OF 240 CM
​"MEDIUM"
"X" OF 305 CM
​"LARGE"
"Z" OF 60 CM (T610)
T 610 SMALL
T 610 MEDIUM
T 610 LARGE
"Z" OF 130 CM (T1300)
T 1300 SMALL
T 1300 MEDIUM
T 1300 LARGE
"Z" OF 150 CM (T1500)
T 1500 SMALL
T 1500 MEDIUM
T 1500 LARGE
"Z" OF 250 CM (T2500)
T 2500 SMALL
T 2500 MEDIUM
T 2500 LARGE
"Z" OF 300 CM (T3000)
T 3000 SMALL
T 3000 MEDIUM
T 3000 LARGE
CUSTOM SIZES AND CONFIGURATIONS AVAILABLE  - please contact us for details

Need something smaller? Please check our P60 series.

Need more cutting wires? Consider the multiwire MW series.

Looking for a beautiful industrial solution? Check out our new 2018 Open Frame series.

IXSHAPER SOFTWARE

  • unlimited free updates for all MegaPlot customers
  • extreme easy of use yet lots of powerful features
  • will work on any Windows PC with USB, including Windows 10
  • available in 11 different languages
  • complex 3D cuts made simple (based on your existing 3D models)
  •  built-in support for HPGL.plt (e.g. CorelDraw), dxf (e.g. AutoCad), RAW 3D (e.g. Rhinoceros 3D), EPS/AI (e.g. AdobeIllustrator), dxf 3D (e.g. AutoCad)
  • multiple objects auto-linking & on-screed cutting simulation
  • built-in sample drawings for each type of cut
  • easy-to-use shape duplication feature
  • arch cutting feature
  • auto-stop and continuation for a broken wire replacement
iXshaper is a Windows application you install on the PC you use to control your MegaPlot machine (via USB). It  is written by our own team of programmers to take full advantage of your MegaPlot hot wire cutter. As a result, it will not work with any third-party machine. 

LEARN MORE ABOUT IXSHAPER

SPECIAL FEATURES & 3D ACCESSORIES

TURNTABLE 
  • 3D cuts out of 3D models or a series of 2D files
  • can cut any symmetrical or irregular shape
  • completely automatic mode & full manual control
  • works with the straight cutting wire and also ShapeWire
  • support for plt, dxf, EPS/AI, RAW 3D and dxf 3D
  • powerful and precise movement mechanism
  • easy to use yet offering unlimited possibilities 
  • up to 3 TurnTables on the same machine ​
​LATHE 
  • perfect for columns and balusters
  • easy-to-use with built-in rotary and lathe modes
  • supports the straight cutting wire as well as ShapeWire
  • create creative twisted shapes 
  • grooves, threads and similar 3D features
  • powerful and precise mechanism
  • software-controller but also full manual control
  • up to 3 Lathes on the same machine
SHAPEWIRE BAR
  • temporarily replaces the straight wire to produce interesting rotary shapes
  • works with both TurnTable and Lathe
  • perfect for grooves, threads and similar shapes
  • 1 mm thick shapeable wire (reusable)
  • will heat up to 50 cm long pieces of shapewire bar
  • easy to install and remove when not needed​
INDEPENDENT AXIS CONTROL
 
  • unique load cell and motor-controlled unlimited wire length change feature
  • advanced software-based wire tension and heating control
  • consistent wire temperature and tension regardless of current length
  • will cut all kinds of tapered shapes
  • material width and position calculations
  • simple two-color drawings support
  • unlimited trolleys' offset
DOUBLE WIRE
  •  double the yield with a second cutting wire
  • two identical shapes produced at the same time
  • variable wire distance
  • available for all spring- or pneumatically-tensioned T series units
  • quick removal of the additional wire if a single wire and full working area are required
  • not available for the independent axis units with the unique unlimited wire length change feature and electric wire tensioning
​
PNEUMATIC WIRE TENSIONING
  • increased wire tension for the widest units with thicker cutting wires
  • optional upgrade for all 2500 mm wide units
  • included in the base price of all cutters of 3000 mm or more
  • requires a small air compressor (not included in the price)
  • simple knob wire tension adjustment
WIRE HANDHELD/REMOTE CONTROLLER WITH A DISPLAY
  • convenient overview of current machine parameters:
    • ​wire location
    • wire heating status and power
    • wire tension (independent axis control units)
    • limit swiches status
  • on-the-fly adjustment of parameters during a cut: increase/decrease wire temperature, increase/decrease cutting speed
  • ​start/stop/continue a cut
  • full manual control of machine movement in all axes
TITANIUM WIRE ®
  • best resistant hot wire on the market. Period.
  • custom made for MegaPlot machines to ensure limited stretching and breakage
  • can withstand higher temperature to increase cutting speed
  • can be tensioned more to ensure accurate cuts
  • available as a paid upgrade for all T series units
  • included in the price of all independent axis units
  • available in new diameters: 0.15, 0.25, 0.30, 0.35, 0.45, 0.55 and 0.6 mm
  • can be added to an existing machine to improve performance

To learn more about resistant wires in the hot wire cutting technology, please click here.

TECHNICAL SPECIFICATION

 
 
WORKING WIDTH = CUTTING WIRE LENGTH
60 cm (T610)
130 cm (T1300)
150 cm (T1500)
250 cm (T2500)
300 cm (T3000
WORKING LENGTH
130 cm (Small)
240 cm (Medium)
305 cm (Large)
WORKING HEIGHT
123 cm
MAX. TRANSIT SPEED
3.000 cm/min.
(5.000 cm/min for independent axis units)
CUTTING WIRE
1 cutting wire (2 wires in DoubleWire units(
​NiCr or TitaniumWire 0.15-0.60 mm (depending on machine width)
wire tensioning: spring OR pneumatic OR electric (independent axis units)
X & Y DRIVES
stepper motors & 10T2.5 cog belts
SOFTWARE RESOLUTION
0.001 mm
OPTIONAL ACCESSORIES
TurnTable
Lathe
​ShapeWire Bar
DoubleWire
Independent Axis Control
Pneumatic Wire Tensioning
TitaniumWire
Handheld/Remote Controller
ACCESSORIES NOT AVAILABLE IN T SERIES
5-wire MW add-on (OF only)
​BarCode Scanning
POWER REQUIREMENTS
230V, 50Hz, from 500W up to 1kW (DoubleWire T3000)
PC REQUIREMENTS
Windows XP, Vista, 7, 8 or 10
SOFTWARE
iXshaper, unlimited free updates, support for:
plt, dxf, EPS/AI, RAW 3D
WARRANTY
complete 5-year warranty on EXW (ex-works) basis
INCLUDED IN THE PRICE
hot wire cutting machine
ARM-based electronic controller
iXshaper software with unlimited free updates
a 100-gram spool of cutting wire
assembly and operational manuals
year-round tech support
​unlimited free training in our factory in Poland
NOT INCLUDED IN THE PRICE
Windows PC necessary to control the machine
graphics software, e.g. CorelDraw
installation and training on site (if required)
Check the Gallery for a large number of great photos showing some very creative products made on our hot wire machines by some of our customers.

REQUEST A QUOTE/MORE INFO

Use the form below or check our full contact details here
    ​