TWISTER PRO

THE ULTIMATE 3D HOT WIRE FOAM CUTTING MACHINE

  • COMPLETELY NEW 2020 SERIES
  • BEAUTIFUL ALL NEW DESIGN
  • BUILT-IN WINDOWS 10 TOUCH PC (INDUSTRIAL/FANLESS)
  • AVAILABLE IN MANY DIFFERENT SIZES AND CONFIGURATIONS
  • UNIQUE INDEPENDENT AXIS CONTROL FEATURE
  • UP TO 3 TURNTABLES AND UP TO 3 LATHES
  • MULTIPLES 3D OPTIONS
  • BARCODE SCANNING, WIRED HANDHELD WITH DISPLAY
  • MAX. TRANSIT SPEED OF 10 METERS/MIN.
  • FULL TABLE FOR CONVENIENT EPS LOADING/UNLOADING
  • ​EUROPEAN QUALITY WITH CE CERTIFICATION 
  • BACKED BY MEGAPLOT'S 25+ YEARS OF DESIGN EXPERIENCE

STANDARD MODELS/CONFIGURATIONS

 
"STANDARD" SERIES
"PLUS" SERIES
WORKING AREA/​TABLE SIZE OF 2500x2500 MM
OF2525S
OF2525P
WORKING AREA/​TABLE SIZE OF 3000x3000 MM
OF3030S
OF3030P
3D FEATURES
NOT AVAILABLE
INDEPENDENT AXIS CONTROL
TURNTABLE
LATHE
​SHAPEWIRE BAR
2 ADDITIONAL TURNTABLES AND 2 ADDITIONAL LATHES
NOT AVAILABLE
AVAILABLE
WORKING HEIGHT
1230 mm (upgradeable to 1840 mm)
1230 mm (upgradeable to 1840 mm)
5-WIRE MW ADD-ON (60 OR 120 CM)
AVAILABLE
AVAILABLE

ALSO AVAILABLE IN A SPECIAL OF1515 ROOF MASTER CONFIGURATION

IDEAL FOR SLOPED ROOF PLATES CUTTING
 
Special features available only on the OF1515 ROOF MASTER:
  • 150x150 cm working table
  • can handle 100x100 cm plates also at the 45 degree angle
  • will cut all 6 plate types shown on the right
  • custom MegaRoofer application for easy drawings' generation
  • TurnTable for other 3D cutting
  • custom material holder for precise 0 and 45 degree positioning
  • small footprint, high yield solution
CUSTOM SIZES AND CONFIGURATIONS AVAILABLE  - please contact us for details

Need something smaller? Please check our P60 series or T series.

Need more cutting wires? Consider the multiwire MW series.

IXSHAPER SOFTWARE

  • unlimited free updates for all MegaPlot customers
  • extreme easy of use yet lots of powerful features
  • will work on any Windows PC with USB, including Windows 10
  • available in 11 different languages
  • complex 3D cuts made simple (based on your existing 3D models)
  •  built-in support for HPGL.plt (e.g. CorelDraw), dxf (e.g. AutoCad), RAW 3D (e.g. Rhinoceros 3D), EPS/AI (e.g. AdobeIllustrator), dxf 3D (e.g. AutoCad)
  • multiple objects auto-linking & on-screed cutting simulation
  • built-in sample drawings for each type of cut
  • easy-to-use shape duplication feature
  • arch cutting feature
  • auto-stop and continuation for a broken wire replacement
iXshaper is a Windows application you install on the PC you use to control your MegaPlot machine (via USB). It  is written by our own team of programmers to take full advantage of your MegaPlot hot wire cutter. As a result, it will not work with any third-party machine.

LEARN MORE ABOUT IXSHAPER

SPECIAL FEATURES & 3D ACCESSORIES

5-WIRE MULTIWRE ADD-ON
  • cut up to 5 identical shapes at the same time
  • adjustable for both vertical and horizontal cuts
  • 13-degree locks for standard sheeting operations
  • easy to install and take off when not needed
  • 60 cm and 120 cm long variants availalble
  • fully adjustable wire distances in 1 mm increments
TURNTABLE 
  • 3D cuts out of 3D models or a series of 2D files
  • can cut any symmetrical or irregular shape
  • completely automatic mode & full manual control
  • works with the straight cutting wire and also ShapeWire
  • support for plt, dxf, EPS/AI, RAW 3D and dxf 3D
  • powerful and precise movement mechanism
  • easy to use yet offering unlimited possibilities 
  • up to 3 TurnTables on the same machine ​
​LATHE 
  • perfect for columns and balusters
  • easy-to-use with built-in rotary and lathe modes
  • supports the straight cutting wire as well as ShapeWire
  • create creative twisted shapes 
  • grooves, threads and similar 3D features
  • powerful and precise mechanism
  • software-controller but also full manual control
  • up to 3 Lathes on the same machine
SHAPEWIRE BAR
  • temporarily replaces the straight wire to produce interesting rotary shapes
  • works with both TurnTable and Lathe
  • perfect for grooves, threads and similar shapes
  • 1 mm thick shapeable wire (reusable)
  • will heat up to 50 cm long pieces of shapewire bar
  • easy to install and remove when not needed​
INDEPENDENT AXIS CONTROL
 
  • unique load cell and motor-controlled unlimited wire length change feature
  • advanced software-based wire tension and heating control
  • consistent wire temperature and tension regardless of current length
  • will cut all kinds of tapered shapes
  • material width and position calculations
  • simple two-color drawings support
  • unlimited trolleys' offset
WIRE HANDHELD/REMOTE CONTROLLER WITH A DISPLAY
  • convenient overview of current machine parameters:
    • ​wire location
    • wire heating status and power
    • wire tension (independent axis control units)
    • limit swiches status
  • on-the-fly adjustment of parameters during a cut: increase/decrease wire temperature, increase/decrease cutting speed
  • ​start/stop/continue a cut
  • full manual control of machine movement in all axes
BAR CODE READER
  • convenient workflow enhancement to save time and cut down on human errors 
  • save you current job (drawings and configuration parameters) to a pdf file with a unique custom barcode
  • print out the pdf and scan the barcode to easily re-open all drawings and configuration settings associated with it
  • built-in barcode manager with ​unlimited number of sets/pdfs
  • simple plug'n'play solution with iXshaper support built-in requiring no special drivers
  • requires an additional free USB port on your PC (apart from the one used to connect the machine to)
TITANIUM WIRE ®
  • best resistant hot wire on the market. Period.
  • custom made for MegaPlot machines to ensure limited stretching and breakage
  • can withstand higher temperature to increase cutting speed
  • can be tensioned more to ensure accurate cuts
  • available as a paid upgrade for all T series units
  • included in the price of all independent axis units
  • available in new diameters: 0.15, 0.25, 0.30, 0.35, 0.45, 0.55 and 0.6 mm
  • can be added to an existing machine to improve performance

To learn more about resistant wires in the hot wire cutting technology, please click here.

TECHNICAL SPECIFICATION

 
 
WORKING WIDTH = CUTTING WIRE LENGTH
150 cm (OF1515)
250 cm (OF2525)
300 cm (OF3030)
WORKING LENGTH
150 cm (OF1515)
250 cm (OF2525)
300 cm (OF3030)
WORKING HEIGHT
123 cm, upgradeable to 184 cm
MAX. TRANSIT SPEED
10 meters/min.
CUTTING WIRE
0.30 mm (OF1515)
0.45 mm (OF2525)
0.55 (OF3030)
TitaniumWire, spring or electric-tensioned
X & Y DRIVES
8Nm stepper motors & 25AT5 cog belts
SOFTWARE RESOLUTION
0.001 mm
OPTIONAL ACCESSORIES
Independent Axis Control ("Plus" models)
up to 3 TurnTables ("Plus" models)
up to 3 Lathes ("Plus" models) 
ShapeWire Tool ("Plus" models) 
​Independent Axis Control ("Plus" models) 
BarCode Scanning (included with all units)
5-wire MW add-on (available for all units)
Handheld/Remote Controller (included with all units)
ACCESSORIES NOT AVAILABLE IN OPEN FRAME SERIES
DoubleWire (n/a due to 5-wire MW add-on)
Pneumatic Wire Tensioning
POWER REQUIREMENTS
230V, 50Hz, from 500W up to 2KW (5-wire MW add-on on OF3030)
PC REQUIREMENTS
Windows XP, Vista, 7, 8 or 10
SOFTWARE
iXshaper, unlimited free updates, support for:
plt, dxf, EPS/AI, RAW 3D
WARRANTY
complete 2-year warranty on EXW (ex-works) basis
INCLUDED IN THE PRICE
hot wire cutting machine
ARM-based electronic controller
iXshaper software with unlimited free updates
a 100-gram spool of cutting wire
barcode scanner
remote controller/handhels
assembly and operational manuals
year-round tech support
​unlimited free training in our factory in Poland
NOT INCLUDED IN THE PRICE
Windows PC necessary to control the machine
graphics software, e.g. CorelDraw
installation and training on site (if required)
Check the Gallery for a large number of great photos showing some very creative products made on our hot wire machines by some of our customers.

REQUEST A QUOTE/MORE INFO

Use the form below or check our full contact details here